Doing so risks getting water in the electronics, which could cause permanent damage and even an electric shock.. 3.
It’s a good idea to empty when the bag reaches 70-80% full, however, as this reduces pressure on the motor and prevents compacted dirt from affecting performance.. Related Article:.How to Empty a Henry Vacuum Cleaner.
Are Henry Bags Re-Usable?.No, standard HepaFlo bags are not re-usable.Once filled, they should be disposed of and replaced with a new bag.. We’ve seen some people recommend cutting open the bag, emptying it into a bin, then taping it up for re-use..
This is a bad idea., as the bag’s filtration properties will be greatly reduced.
A repaired bag is also much more likely to split as it fills up.. Numatic do sell re-usable bags though.
These have a zip to allow you to empty the bag before re-using it.If dust and other debris is allowed to build up on these filters, airflow through the vacuum is reduced.. Aside from reducing suction power, this reduction in airflow also prevents the motor from being cooled sufficiently.
This leads to overheating and activation of the thermal cut-out.. Fortunately, this is one of the easiest issues to solve.Switch off your vacuum cleaner and unplug it from the mains supply, then check your manual for how to clean the filters.
Once the filters have been cleaned, allow 24 hours for the vacuum to cool and the filters to dry before trying to start your vacuum again.. On a similar note, overfilling a bagless Vax vacuum can have a similar effect on airflow.Make sure you empty your vacuum before it reaches the maximum fill line..